Elesa DD52R-E Mode D'emploi page 26

DD52R-E
The available parameters and their descriptions are listed in the following
table.
Parameter
dir
OriGin
OFFSET
StEP
rES
diSPL
SPEEd
P_toll
_ _ _ _ _ 0
EN
26
Description Available options
Rotation
--o clockwise
direction
o-- counterclockwise
Absolute
-99999 ; 99999
reference
The parameter value depends
value
on the unit of measure selected.
Compensation
-99999 ; 99999
values
The system allows you
(Offset)
to store up to 10 compensation
values:
OFS 0 ... OFS 9
The parameter value depends
on the unit of measure selected.
Reading
0.01 ; 100.00
after one revolution
Resolution
mm:
inches: 0.001 ; 0.01 ;
degrees: 0.01 ;
Display orientation
0° :
180° : display reverse
Reading max speed
300 ; 600 ; 1000
[rpm]
Tolerance of target
0.01 ; 9.99
position
The parameter value depends
on the unit of measure selected.
Key function
ALL : selectable units of
measure: mm, inch, D
nodEG : selectable units of
measure: mm, inch
OFF : the key does not allow the
unit of measure conversion
Direct drive electronic position indicators
1 ; 0.1 ; 0.01
0.1 ; 1
0.1 ; 1
display right
Models all rights reserved in accordance with the law.
Standard
value
--o
0
0
001.00
mm: 0.1
inches:
0.01
degrees: 1
0°
600
0.05
ALL
Alw