Raider Pro RDP-SCIW20-5 Mode D'emploi page 9

All manuals and user guides at all-guides.com
9
1. General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire and / or severe injuries.
Keep these instructions in a safe place.
1.1. Safety in the workplace.
1.1.1. Keep your workplace clean and well lit. Disarray and poor lighting may contribute to
the occurrence of an accident.
1.1.2. Do not operate in an environment where the impact wrench with an increased risk of an explosion in the vicinity of flammable
liquids, gases or powders.
During operation of the impact wrench can be separated sparks that can ignite powders or
fumes.
1.1.3. Keep children and bystanders at a safe distance while working with the impact wrench. If your attention is diverted, you may
lose control over the impact wrench.
1.2. Safety when working with electricity.
1.2.1. Protect your impact wrench from rain and moisture. Penetration of water into the impact wrench increases the risk of electric
shock.
1.3. Safe way of working.
1.3.1. Be concentrated, watch their actions carefully and act cautiously and prudently. Do not use the impact wrench, when you
are tired or under the influence of drugs, alcohol or
narcotic drugs. A moment of distraction at work striking impact wrench may have the effect of extremely serious injuries.
1.3.2. Work with protective work clothing and always with safety glasses.
Wearing Suitable for drilling shock and the activities of personal protective equipment, such
as respiratory masks, healthy, tightly closed shoes grapple with a stable, protective helmet and
silencers (hearing protectors), reduces the risk of accident.
1.3.3. Avoid the danger of switch on the impact wrench inadvertently. If, when you carry the
impact wrench, keep your finger on the trigger switch, there is the risk of accident.
1.3.4. Avoid unnatural positions of the body. Work in a stable position of the body at any
time and keep the balance. So you can control the impact wrench better and safer if unexpected
situations arise.
1.3.5. Work with appropriate clothing. Do not operate with loose clothing or ornaments.
Keep your hair, clothes and gloves at a safe distance from rotating units of the impact wrench.
Robes, jewelry, long hair can be caught and carried away by chuck.
1.4. Care to impact wrench.
1.4.1. Keep impact wrench in places where they could not be reached by children. Do not let it be used by persons who are not
familiar with how to work with it and have not read those instructions. When in the hands of inexperienced users, the impact
wrench can be dangerous.
1.4.2. Keep your impact wrench carefully. Check whether the mobile units operate impeccable, whether it jamming, if there is
broken or damaged item which distort or alter the functions of the impact wrench. Before using the impact wrench, make sure that
the damaged parts to be repaired. Many accidents are caused by poorly maintained power tools and appliances.
1.4.4. Keep your cutting tools well sharpened and always clean. Properly maintained cutting tools with sharp edges have less
resistance and working with them easier.
1.4.5. Use the impact wrench, attachment, working tools, etc., according to the manufacturer's instructions. In doing so must
comply with specific operating conditions and operations to perform. Using a impact wrench than those provided by the
manufacturer applications increases the risk of accidents.
1.5. Instructions for safe handling, specific for your purchased impact wrench. Loss of control over power tool could lead to the
occurrence of accidents.
1.5.1. Do not use additional devices which are not recommended by the manufacturer for this particular power tool. The fact that
you can attach to specified device or machine working
tool does not ensure safe working with him.
1.5.2. Never put your hands near the rotary working tools.
1.5.3. If you perform activities which threaten to fall working tool of hidden wires under tension, hold power tool only electric
insulated handles. When entering the working tool in contact with the wires under tension, it is transmitted through the metal
details of the impact wrench and this may lead to electric shock.
1.5.4. Use appropriate instruments to find any hidden beneath the surface pipelines, or contact the appropriate local supply
company. Into contact with the wires under tension can cause fire or electric shock. Pipeline damage can lead to explosion.
Deterioration of water has the effect of major material damage and may cause electric shock.