Publicité
ASSEMBLY INSTRUCTIONS
1. At the rear of the fountain (A), locate the pre-installed
tubing and attach the tubing to the pump (B).
2. Locate the cord from the LED light (C) and pass it out
the access hole at the rear of the fountain (A). Connect
the cord from the LED light (C) to the pump (B).
3. Place the pump (B) inside the fountain body reservoir.
Install the pump access door (D).
4. Fill the water reservoir with enough water to
completely submerge pump (B). Connect the power
cord into an electrical socket to run the fountain.
All manuals and user guides at all-guides.com
1
B
2
C
B
3
4
B
3
A
A
D
B
Publicité
