Mooreco Lab Stool 34419R Mode D'emploi page 4

Place the seat (P1) upside-down on a non-scratch surface. Attach the frame (P2) to
STEP 1
the seat by screwing the M6 x 30mm (A) screws through the holes in the frame into
the inserts on the seat.
P1
Attach the adjustable leg(P3) to the frame using the M6 x 12 mm (B) button head
STEP 2
screws. Repeat for all legs.
P3
UPDATED AS OF: 06/12/2023
P2
A
Repeat for all legs.
B
4 of 5