Publicité
Les langues disponibles
Les langues disponibles
6)Change number of hours — Night
Press and hold
times.
Enter the desired number of hours
for nighttime setback. Save by
pressing
or wait 15 seconds for
automatic confirmation.
7) Cancel (skip) setback period
Press and hold
once (depending on which setback
period you want to cancel).
*The heater will skip an active setback
period or the next setback period.
*During the next setback period, the
heater will automatically resume the
programmed temperature.
8) Delete a setback programme
Press and hold
which setback period you want to cancel)
for three seconds.
9) Open window function
The heater has an open window function.
If a window is opened near the heater, the sensor will detect if the temperature drops by
2℃ or more within two minutes. The heater will switch off automatically and show
The heater will restart automatically after 10 minutes. You can manually restart the
heater by pressing
Default setting of open window function is closed.
Hold
for five seconds and the display shows
window function. The display shows 'ON' and will flash for 15 seconds to confirm
automatically. You can press
To stop the open window function, hold
then press
. The display shows 'OF' and will flash for 15 seconds to confirm
automatically. You can press
, then press
2
, then press
or
or
(depending on
. The icon
disappears and will show the previous mode.
to confirm straight away.
to confirm straight away.
. Then press
for five seconds – the display will show
18
.
to start the open
,
Publicité
