Publicité
3
8. Pick up the Backrest (A) and align the mounting holes on back support with the threaded inserts on the
Seat Cushion (B). Attach it in place by inserting four 5/16" x 1" Bolts (3) with the enclosed hex wrench.
9. Turn the assembled seat upright and locate the
center hole of Mechanism (D) over the Gas Lift
(F). Press down firmly until connection is secure.
10. Insert Wood Plugs (5) to cover the countersunk
holes on Armrests (CL and CR).
11. Before using your chair, ensure that all the bolts
are fully tightened for safety. See easy adjustment
instructions to ensure custom comfort.
NOTE: Please keep the hex wrench and check
all bolts periodically to ensure these remain
tightly fastened.
Assembly Instructions
B
D
A
⑤
x 2
5
3
CR
5
③ x 4
CL
B
D
F
5
Publicité
