Yard force LX PB74 Mode D'emploi page 4

Introduction
EN
When devices are connected, the LED indicators will light up as follows:
( : LED is off;
Battery Status Indicator
• USB Low output: when the power of the USB and Type-C output is too low,
the output will automatically stop working.
• Low Battery: The last LED flashes blue.
• Protection Activation: When an abnormal connection is detected, all of the
LED indicators will flash and the AMIRO Power Bank will cut off all
connections. To start using it again, recharge or press the Power Button.
Power Button
• When the AC output is off, press and hold the Power Button for 3 seconds
to turn on the AC output. Press the button again to show the remaining
battery level.
• When the connected device is fully charged, the AC output will
automatically shut off. Turn if on again before charging another device.
• If the AC output fails, press the Power Button for 3 seconds to turn on the
AC output again.
: LED is on)
Battery Level
0% - 20%
21% - 40%
41% - 60%
61% - 80%
81% - 99%
100%