VEVOR VOLD-004 Mode D'emploi page 4

Safety & Warning
• Read and understand this entire manual before assembling, installing,
operating, or servicing this product. Failure to follow these warnings and
instructions can cause death, personal injury or damage to valuable
property.
• While assembling this product, keep work area clean and well lighted,
and keep spectators and children out of the work area.
• When using the stove, please be sure to check whether it is deformed or
damaged. Especially if there is a crack or breakage on the glass, never use
it.
• The first time you use it , the color of the stainless steel grid will change,
which is a normal phenomenon .It is recommended to burn at high
temperature for 2 hours after the first use.
• When setting the stove, please set it in a flat place.
• When assembling the product, the hand clips and sharp parts may be
disassembled up and down. Please be sure to wear gloves for assembly.
• Please pay attention to the use of stoves in tents or extended spaces.
Please keep the air well ventilated.
• Carbon monoxide is a colorless and transparent gas that must be
discharged safely to avoid accumulation in a closed environment.
• It is best to place a carbon monoxide detector in the space of the stove.
Never let children and pets near the stove, it will be very hot.
• Try to install safety protection devices, and be careful not to let children
touch their hands.
• When using the stove, please put it on the fire-resistant floor to prevent
the tent floor from catching fire. Please add fuel carefully when opening the
fuel injection port.
• Every time you operate the parts of the high-temperature furnace, please
use heat-resistant gloves to avoid burns.
• Fuel, propane, fuel nozzle, paint, thinner and combustible materials
should be stored away from the stove and ventilation pipes. This kind of
combustible material is recommended to be 6 feet (about 180 cm) away
- 2 -