Technical Data; Power Adaptor - Renkforce Rf-6027504 Mode D'emploi

9 Technical data

9.1 Product
Input (DC)....................................... 12 V/DC, 3 A
Output (USB-A) .............................. Single port: 5 V/DC 1.5 A max.
USB ................................................ 3.2 Gen 2 max. 10 Gbps 900 MB/s read-write
Over current protection................... yes (input >15 V/DC 5 A)
Overheat protection........................ yes (>58 °C)
Short circuit protection.................... yes
Overload protection ........................ yes (upstream current limiting)
Single port ON/OFF........................ yes (power and data)
Port power indicator........................ yes
Plug and play.................................. yes
Operating temperature .................. 0 to +40 °C
Operating humidity ........................ 10 - 90 % RH (non-condensing)
Storage temperature ...................... -10 to +70 °C
Storage humidity ............................ 10 - 90 % RH (non-condensing)
Dimensions (W x H x D) (approx.) . 161 x 52 x 25 mm
Weight (approx.) ............................ 230 g

9.2 Power adaptor

Input ............................................... 100 - 240 V/AC, 50/60 Hz
Output............................................. 12 V/DC, 3 A 36 W
Cable length ................................... approx. 120 cm
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*3013752_V2_0624_dh_mh_en 9007200488682507-2 I2/O2 en
4
Total (shared: 5 V/DC 6.5 A max.