Display Of The Measurement Unit - Jeulin Redy Mode D'emploi

Data logging
REDY Motion sensor
Ref : 488 027
The sensor appears in the sensors list.
In order to make sure that the desired sensor is detected, you can verify that the address
number written on the sensor screen, and that appearing in the application sensors list,
match.
This address number is unique for each sensor.
In the example above, it is the 000.
•
Note the apparition of the Bluetooth logo
message « Connected » in the end.
Click ont the sensor settings button in the window below:
ENGLISH
Start the connection by pressing on the desired sensor in the list. A temporary icon
appears, then the application confirms that the sensor is connected when the
indications below show on the screen
6.3

Display of the measurement unit

:
next to the sensor name, as well as the
31