Setting The Acquisition Versus Time; Setting The Measurement; Setting The Time Parameters - Jeulin Redy Mode D'emploi

Data logging
REDY Ohmmeter sensor
Ref: 488 012
The value read by the sensor appears in the multimeter screen, placed by default in the
bottom right portion of the screen:
The sensor activation, detailed in the previous chapter, selects the sensor automatically
for an acquisition. Therefore, no further additional configuration action needs to be taken.
Click on the icon Setting of the main screen:
ENGLISH
6.4

Setting the Acquisition versus Time

6.4.1 Setting the measurement

6.4.2 Setting the Time parameters

20