VEVOR SC-82 Mode D'emploi page 9

OPERATING INSTRUCTIONS
Before using the appliance for the first time, peel off any promotional
materials and packaging materials, and check that the cooking
plates are clean and free of dust. If necessary, wipe them over with a
damp cloth. Spread over with an absorbent kitchen towel and wipe
off any excess oil. When your appliance is heated for the first time, it
may emit slight smoke or odor, which is normal for many heating
appliances, and will not affect the safety of your appliance.
Please dispose of all plastic bags carefully and keep them away from
children and pet.
1. Place the machine on a clean, dry, level surface near a plug base
outlet.
2. Plug the cord into the wall outlet.
3. The user should place the oil on the half fryer when in use.
4. Turn on the power switch (SC-82 has no power switch), and the
green indicator light will be on while power is supplied to the oven.
Turn the temperature knob clockwise to adjust the temperature to
the desired temperature. At the same time, the red indicator light is
on, indicating that the electric heater begins to heat up and the
temperature of the oil starts to rise.
5. When the temperature rises to the desired level, the heat
controller will automatically cut off, while the red indicator light goes
out and the electric heater stops heating.
6. When the temperature is slightly lower, the heat controller will
automatically energize, the red indicator light and the green indicator
light will be on, the electric heater will work again and the
temperature will rise.
7. After finished, for safety, please turn the temperature knob
counterclockwise to the limit position and cut off the power.
NOTE: It works in this way repeatedly in order to make sure
temperature is certain in a range.
8