Publicité
Les langues disponibles
Les langues disponibles
4.3 Other features :
SLEEP/ECO operation
This feature can be activated from the remote control ONLY. To activate SLEEP
feature, the set temperature will increase(cooling) or decrease(heating) by
1°C/2°F (or 1°F) in 30 minutes. The set temperature will then increase(cooling)
or decrease(heating) by another 1°C/2°F (or 1°F) after an additional 30 minutes.
This new temperature will be maintained for 7 hours before it returns to the
originally selected temperature. This ends the Sleep mode and the unit will
continue to operate as originally programmed.
Note :
This feature is unavailabe under FAN or DRY mode.
AUTO-RESTART
If the unit breaks off unexpectedly due to the power cut, it will restart with the
previous function setting automatically when the power resumes.
AIR FLOW DIRECTION ADJUSTMENT
Adjust the air flow direction manually:
· The louver can be set to the desired position manually.
· Do not place any heavy objects or other loads on the louver, doing so will
cause damage to the unit.
· Ensure the louver is fully opened under heating operation.
· Keep the louver fully opened during operation.
WAIT 3 MINUTES BEFORE RESUMING OPERATION
After the unit has stopped, it can not be restarted operation in the first 3
minutes. This is to protect the unit. Operation will automatically start after 3
minutes.
POWER MANAGEMENT feature(on some models)
Under cooling operation, when the ambient temperature is lower than the
setting temperature for a period of time, the unit will be automatically operate
power management feature. The compressor stop but the fan motor do not
stop. When the ambient temperature is higher than the setting temperature,
the unit will be automatically quit the power management feature. The com-
pressor and (or) fan motor run.
ENG
19
Publicité
