Little Balance EASY PERFORMANCE LB8804 Manuel D'instructions page 22

runs from 0/1/2/3... to 100. When battery is fully charged: LED display shows 100. The
"plug" symbol will switch to blue color and start flashing.
2. When using the device: digits runs from 100/99/98.. to 00.
3. When low battery capacity (15 capacity): the "plug" symbol will start to flash in red
color.
4. When accumulative operating time reaches 120 minutes, the "oil bottle" icon starts to
flash for blade lubrification reminder.
OPERATING INSTRUCTIONS
Add some lubrication oil on the blades before first use.
CORDED & CORDLESS USE.
Regardless of the charging status of the battery, the hair clipper can be used in mains mode.
1. Before using the hair clipper in mains operation, ALWAYS ensure that the device is
turned off by sliding the ON/OFF switch to OFF position.
2. Connect the USB charging cable to the device charging socket.
3. Insert the USB charging cable into a compatible adapter.
4. Turn on the hair clipper by sliding the ON/OFF switch to ON position.
CHANGE, REMOVE AND ATTACH THE GUIDE COMBS
NOTE. ALWAYS switch off the hair clipper when attaching, adjusting or removing the guide
combs.
1. Release the blade protective cap by pulling it from its bottom.
2. Select the appropriate guide comb (1.5mm/3mm/4.5mm/6mm/10mm/12mm/15mm
/18mm). Each guide comb is marked accordingly on it outside middle surface.
3. To attach a guide comb, hold it with its teeth upwards and slide it onto and along the
hair clipper blade until the front of the guide comb is firmly positioned against the
blade.
4. To remove the guide comb, slide it off from the hair clipper blade.