LevelOne WAB-6121 Guide D'installation Rapide page 2

All manuals and user guides at all-guides.com
English
1. Install
1. Connect one end of an Ethernet cable to the POE port of the provided Power
Injector and the other end of the Ethernet cable to the LAN port of the CPE.
Then, connect the LAN port of the Power Injector to a PC using another Ethernet
cable. Finally, plug the provided power adapter into the DC jack on the Power
Injector, and the other end to a standard electrical wall socket.
2. If you use two CPEs to build the network, please make sure that the two CPEs are
placed face to face.