Global 318511 Manuel D'instructions

globalindustrial.ca
Instruction Manual
Customer Service
US: 1-800-645-2986
WARNING:
Please read all instructions before use and save this
manual for future reference.
• DO NOT INSERT YOUR FINGERS INTO CUTTING
HEAD.
• DO NOT place any objects in the unit that can damage
the blades.
• DO NOT use the unit on an unsteady surface.
• DO NOT use the unit in humid or dusty environment.
• DO NOT disassemble or modify the tape dispenser.
• DO NOT replace parts or move the unit when still
plugged in.
• DO NOT use any volatile liquids to clean the unit. Wipe
with dry cloths only.
• DO NOT use if the cable is damaged. This may cause
a fire or electric failure.
• DO NOT use power other than the set voltage labeled
on the machine.
Reel
Control Panel
Feed Roller
Pressure Knob
Cutting Head
(Auto Feed Cutter Unit.)
Sensor Switch
Sensor Plug
1. Power Switch
2. Tape Length Display
3. Length adjustment key
4. Reverse key
5. 20 (reset) key
6. Feed key
7. Cut key
8. Auto Key
9. Pressured knob
Manual de Instrucciones
Servicio de atención al Cliente
México: 01.800.681.6940
ELECTRIC TAPE DISPENSER
1. Power Switch
Press to turn power ON or OFF
Shows tape length and error
The last digit indicates "mm" (0-9mm)
And the first two digits "cm" (20-990mm)
Feed roller reverse by pressing . Use this key for changing tape.
Resets length display reset and back to min set length of 20mm
Tape dispenses as long as
Press
Press AUTO to feed tape to the preset length and cuts automatically
Adjust press (top) roller to change presser on tape.
Distribucion Industrial Globales S DE RL DE CF
318511
Fuse
is pressed.
to cut tape.
1
Manuel d'instruction
Service à la clientèle
Canada: 888-645-2986
052217