Albatross A1 Instructions D'utilisation page 19

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Tiller adjustment
1.
4.
Safety and warning notices
Attention, read carefully
• Check whether the charger is working properly. A defective charger can damage the battery!
The LED of the charger lights up green continuously without the battery being connected.
When the battery is connected, the color changes to red, i.e. charging begins.
• Do not throw, drop, damage or manipulate the battery (e.g. by drilling, soldering, gluing,
etc.). If the housing is broken or a part is broken off, the battery must be properly
disposed of immediately.
• Keep the battery away from fire and do not expose it to extreme temperatures (e.g. in par-
ked cars in summer, unheated Caddy halls in winter).
• Do not pour liquids over the battery or dive it. A battery submerged in water may no
longer be used and must be properly disposed of immediately.
• Use the battery only for the Albatross trolley.
• ! Failures into following the safety and warning notices can damage the battery. The-
refore the guarantee expires. Disregarding the instructions can lead to an increased
risk of fire.
Maintenance
Regular maintenance and care contribute to the life support of your trolley. Ideally, you
should clean your trolley with compressed air or a wet cloth after each round.
In any case, avoid getting water on the control, battery connection and electronic compo-
nents. Never use a high pressure cleaner! Avoid the use of abrasive and harsh cleaning sup-
plies or the use of oils and greases. All components of the trolley are designed in such a way
that lubrication / greasing is unnecessary, on the contrary, it is rather counterproductive.
2.
1. remove emblem
2. take off emblem
3. adjust
3.
4. assemble emblem
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

A2

Table des Matières