Wakefield RENESSE 278736 Notice De Montage Originale page 11

HALF METAL. K.D.
COFFEE TABLE
Afmetingen / Dimensions
ASSEMBLY INSTRUCTIONS
READ & SAVE BELOW INSTRUCTIONS BEFORE ASSEMBLY
1. PLEASE SEPARATE AND IDENTIFY ALL PARTS,MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED.
2. TO AVOID ANY SCRATCH DURING ASSEMBLY, PLEASE ASSEMBLE ON A SOFT MAT OR SIMILAR.
3. PLEASE ASSEMBLE STEP BY STEP AND FOLLOW THE INSTRUCTIONS.
4. WASHERS MUST BE USED.
Montage
5. WHILE EACH SCREW AND NUT IS PROPERLY FASTENED, DO NOT OVER FASTEN IT.
6. DO NOT COMPLETELY FASTEN EACH SCREW AND NUT UNTIL ALL THE SCREWS ARE PROPERLY FIXED.
x1
1
M6X20
Ax12 Bx12
Install all the relevant screws,but do not tighten them completely at the very beginning.
Tighten the screws fully one by one.
Originele montagehandleiding / Notice de montage original
104cm
x4
2
Cx1
35cm
54cm
Don't tighten up the screw before you start next mounting during the
installation.
1
x
1
11