Uline H-285 Mode D'emploi

H-285, H-338,
H-339, H-340
TABLETOP CUTTER
1. Disassemble one end of cutter to remove old
cutting head.
2. Replace with new cutting head and reassemble
cutter. Ensure knife fits between hardened blue steel
blade and aluminum track and does not ride
on foam.
3. Loosen cap nuts to adjust knife height for material
thickness. A gap should be between black rubber
wheels and aluminum track.
PAGE 1 OF 3
1-800-295-5510
uline.com
ROTARY HEAD REPLACEMENT
The bearings are
glued in place and
not serviceable.
Rotary Knife
Axle
5/16" Flat Washer
Cap Nut
Black Rubber Wheel
Aluminum Track
Hardened Blue Steel Blade
Para Español, vea página 2.
Pour le français, consulter la page 3.
Foam
0524 IH-339