Rondel 31 - Emergency Kit
5
6
4
1
1
2
2
40
ø12
1...2.5mm
2
12
ø12
0.75...2.5mm
2
Connecting the battery into the EM-Kit only when it can be
Connecting the battery into the EM-Kit only when it can be
ensured that there is a constant voltage supply on L1 for at
ensured that there is a constant voltage supply on L1 for at
least 16 hours to guarantee an optimal charging of the battery.
least 16 hours to guarantee an optimal charging of the battery.
The process of charging must not be interrupted otherwise the
The process of charging must not be interrupted otherwise the
battery can be damaged and a proper function can not be
battery can be damaged and a proper function can not be
guaranteed.
guaranteed.
To test the emergency function an external test switch should
To test the emergency function an external test switch should
be used.This luminaire should not be used in expodes outdoor
be used.This luminaire should not be used in expodes outdoor
environments!
environments!
Test Switch
Test Switch
- For connection to the emergency lighting unit
- For connection to the emergency lighting unit
- For checking the device funtion and plug connection.
- For checking the device funtion and plug connection.
After the lamp mounted, press and hold the reset button. The
After the lamp mounted, press and hold the reset button. The
emergency lamp will be light on. (Test whether the emergeny
emergency lamp will be light on. (Test whether the emergeny
lamp is under good condition); Release the reset button, the
lamp is under good condition); Release the reset button, the
emergency lamp inicator light on. (green, charging state).
emergency lamp inicator light on. (green, charging state).
Check date of manufacturing (D.O.M.):
Check date of manufacturing (D.O.M.):
Not older than two years
Not older than two years
Date of Installation
Date of Installation
_ _/_ _/_ _ _ _
_ _/_ _/_ _ _ _
DISO IFR186509005189
DISO IFR186509005189
3.2V 3Ah LiFePO4
3.2V 3Ah LiFePO4
N
E
L
DALI+
DALI-
L1
L1
BR
DALI-
DALI+
L
E
BL
N
3
3
L1
DALI-
DALI+
L
E
N