Publicité
Thank you for choosing Approx Desktop Barcode Scanner. Powered by ad-
vanced decode algorithm and mega pixel Cmos sensor, the appLS08+ is
delivering the superior scanning performance for any 1D or 2D codes, with a
ultra large scan window and high motion tolerance.
1. Features
- 1D y 2D (top button on scanner activates/deactivates 2D codes)
- Automatic objects detection
- Superior Scanning Speed
- Large Scan Window
- High Motion Tolerance
- USB interface
2. Setting code switch
a. Make sure that the scanner, the data cable, the host and power supply are
properly connected and powered on normally.
b. Place the barcode in the field of view and aim it at the scan window. The
illumination LED will be activated, the red illumination area will appear and the
decoding process will begin.
c. When the good read beep sounds and the green LED is on, it indicates
the decoding is successful. The scanner will transmit the decoded data to
the host.
d. The optimal scanning distance is about 7cm away from the scan window.
By turning on the setting code function, the parameter configuration of the
reading module can be carried out by scanning the setting code.
Enable programming code scanning
Disable programming code scanning
3. Recovery factory setting
By scanning the "restore factory setting" barcode, all the parameters of the
read module can be restored to the factory's configuration.
Restore to factory default
4
Publicité
