Paper Shredder
Operating
Instructions
Warning
Installation
Operation
Maintenance
Troubleshooting
* One Folded Sheet Of Paper Equates To 2 Sheets Of Paper
Heavier paper, humidity or other than rated voltage may reduce shredding capacity.
Installation
1. This model includes a built-in safety interlock mechanism, which requires the shredder to
be correctly mounted on to the included wastebasket. THE SHREDDER WILL NOT OPERATE
UNLESS IT IS PROPERLY MOUNTED AS PICTURED. (FIGURE 1)
2. A socket-outlet should be near the equipment and be easily accessible.
3. Connect the power cord to any standard 120 volt AC outlet.
!
Caution:
Crosscut shredders have very sharp exposed blades on the underside.
Use care when mounting the shredder on the wastebasket.
Sheet Capacity
Paper Shred Size
Paper Entry Width
Credit Card Capacity
Duty Cycle
Voltage
FIGURE 1
8 Sheets of 20 lb. bond paper*
3/16 in. x 1 27/32 in. pieces
5 mm x 47 mm pieces
8.7 in / 220 mm
1 at a time
3 min. on / 30 min. off
120V~60Hz / 2.2 A
ENGLISH
5