blum SERVO-DRIVE uno Notice D'utilisation page 18

SERVO-DRIVE uno
Problems
SERVO-DRIVE uno will neither
work by pulling nor pushing.
SERVO-DRIVE uno will only
work when pulling – not when
pushing.
8
Possible cause
Blum transformer is not
connected to the outlet.
Power supply interupted.
Blum transformer is defective.
Cabling is defective.
Max. fill height of drawer has
been exceeded.
SERVO-DRIVE uno is defective.
Object is obstructing path.
Blum distance bumper is
missing or defective.
BA-140/1ML-A
Remedy
➢ Plug in the Blum
transformer to the outlet.
➢ Check the circuit
breaker/fuse box.
➢ If necessary, contact an
authorised electrician.
➢ Replace the Blum
transformer.
➢ Open the drawer manually.
➢ Remove the items that are
too high from the drawer.
➢ Replace the drive unit.
➢ Remove the obstruction.
➢ Attach or replace the Blum
distance bumper.