Care And Maintenance; Control Panel; Functions; Initialising The Control System - Hoffman Garant Manuel D'utilisation

3.

Care and maintenance

In general all the lift columns should serviced externally every 6 months.
For this we recommend light lubrication of the guide slots and slide
channels by application of a liquid spray containing PTFE, in order to
minimise wear of the slide runners. There is no need to open the columns.
Make sure that no liquid penetrates into the device.
4.

Control panel

5.

Functions

5.1.

Initialising the control system

The control system is initialised by pressing the UP 1 and DOWN 1 buttons
simultaneously, and keeping them depressed. This causes the drives to
move down to their mechanical end stop and then switch off automatically.
At this point the buttons can be released.
The control system acknowledges the completion of initialisation with 3
acoustic beeps. The control system is now ready for operation.
5.2.

Manually adjusting the height of the bench

Press the UP 1 button to raise the bench. Press the DOWN 1 button to lower
the bench.
The drives continue to run as long as the button is kept depressed.
NOTE: The function buttons UP 2 / DOWN 2 / P / Enter / HB are
deactivated.
www.hoffmann-group.com
DE
EN
FR
IT
ES
13