Nidec Shimpo RK-3D Série Mode D'emploi page 4

●Set-Up
The following steps should be followed BEFORE operating the wheel
1.
Remove wheel from shipping box.
2.
Place wheel on a firm and stable work surface.
3.
Foot pedal and splashpan are shipped
disassembled.Remove them from their packing
material.
4.
Install pedal.
5.
Level the wheel.
Attach the Two-Piece Splashpan to the wheel, seating it under the flange of the
6.
bearing holder (under the wheelhead)
splashpan:half(partA)
Wheel head
5
Level the wheel.
plastic clip
1.Insert splashpan half (part A) into the
groove (recess) on the bottom of the
bearing holder.
2.Insert splashpan half (part B) into the
across from partA.
3.attach the plastic clip.
splashpan:half(partB)
3
6
Attach the Two-Piece
Splashpan
4
Install pedal.