PROZIS REY Mode D'emploi page 10

EN
Changing the attachment heads
1
1. Before changing the attachment heads, make sure your trimmer is switched off.
2. Remove any guide combs attached to your groomer. To remove an attachment head, hold the trimmer handle with
one hand, while holding the attachment head with the other. Pull the attachment head back and away from the front
of the handle (fig. 1) and remove it (fig. 2).
3. To place any attachment head, the driving pin needs to be in a central position. If it is not, center it manually. Make
sure that the base of the attachment is placed correctly onto the device (fig. 3) and click the attachment head into
position (fig. 4).
Trimming nose/ear hair:
B2
1. Equip the nose trimmer attachment (B2).
2. Switch on the trimmer.
3. Place the tip of the attachment against the hairs protruding from the nostrils or ears to cut and remove.
Caution: Only use the trimmer to remove hair from the referred areas. Do not insert the trimmer more than 0.5
cm into the ear or nostril, or risk injuring yourself.
10
All manuals and user guides at all-guides.com
2 3 4