Maintenance
□
Shut off the main power supply before performing any maintenance on the light.
□
Wipe with damp cloth or use window cleaner. Do not use abrasives.
Care and Cleaning
□
To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the glass
and surface of the fixture.
□
To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at
the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the inside glass and
interior surface of the fixture.
□
Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully
Troubleshooting
Problem
The bulb will not light.
The fuse blows or circuit breaker
trips when the light is turned on.
Possible Cause
The LED is burned out.
The power is off.
There is a faulty wire connection.
There is a faulty switch.
There are crossed wires or the power
wire is grounding out.
Corrective Action
Replace the fixture.
Make sure power supply is on.
Check the wiring.
Test or replace the switch.
Check the wire connections.
9
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS