Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Problems
The appliance is not
working after plugged in.
Noise during operation.
Abnormal noises or
vibrations.
Ingredients are sticked at
the bottom of the bowl.
Leaked over the cover lid.
Blades are not blending.
Blender stop working
CLEANING AND MAINTENANCE
1. At the end of the program, switch off your appliance by
positioning the variator to 0.
2. Unplug your appliance from the power socket.
Cleaning the accessories:
Causes
1. Wrong assembling of accessories.
2. The cover is not well assembled.
1. Squeaking/cracking noises.
2. Vibration of motor/accessories.
1. Accessories are not well assembled.
2. The appliance is not placed on a flat
and stable surface.
1. The ingredients have high volume of
stash and/or sugar.
2. Too much ingredients and not enough
water.
1. Too much water or ingredients.
2. The cover is not well assembled.
1. Ingredients are too big.
2. Too much water or ingredients.
1. Motor overload.
Wash the accessories with a sponge
and dishwashing liquid and rinse
them.
Do not put the appliance into a
dishwasher.
Warning: avoid spillage on the
electric connectors of the blender.
1. Disassemble and assemble again all
accessories.
2. Switch off the appliance and replace
correctly the cover.
This is normal: these noises indicate your
machine is extracting the juice.
1. Switch off the appliance, disassemble
and assemble again the accessories
2. Switch off the appliance and place the
appliance on a flat and stable surface.
1. Change your recipe for next time.
2. Add liquids to your preparation.
1. Remove water or ingredients.
2. Switch off the appliance and replace
correctly the cover.
1. Repeat the cooking program. Ensure to
cut your ingredients smaller (2-3cm).
2. Take out the excess of water or
ingredients.
1. Put the variator on 0, unplug the power
cord and let the blender rest for 30 min.
6
ENGLISH
Solutions
Publicité
