MAC TOOLS MTPROG Manuel De L'utilisateur page 2

TABLE OF CONTENTS
Introduction
Important Safety Instructions
Personal Precautions
Specifications
Preparing to Use the Jump Starter
Jump Starter Location
Charging the Internal Battery
Operating Instructions
INTRODUCTION
Mac Tools ™ MTPROG
The is a precision-built jump starter, designed for professionals. This jump starter will deliver efficient,
dependable service when used correctly and with care. As with any professional jump starter, for best performance the manufacturer's
instructions must be followed. Please study this manual before operating the device and understand the safety warnings and
instructions. The instructions on installation, operation and maintenance should be read carefully, and the manual kept for reference.
NOTE: Additional safety measures may be required because of your particular application of the device.
Mac Tools
Contact your
www.mactools.co.uk Mac Tools • 210 Bath Road • Slough Berkshire, SL1 3DY, UK +44 (0) 114 2917266
READ THIS MANUAL BEFORE OPERATING THE MACHINE.
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
2
All manuals and user guides at all-guides.com
2
3
3
4
4
4
5
5
representative or distributor with any questions concerning the device and its use.
WARNING
IMPORTANT SAFETY INFORMATION ENCLOSED.
SAVE FOR FUTURE REFERENCE
Always wear eye protection.
Always wear protective gloves.
CONTAINS SEALED NON-SPILLABLE LEAD-ACID
BATTERY. MUST BE DISPOSED OF PROPERLY.
WARNING: Possible explosion hazard. Contact
with battery acid may cause severe burns and
blindness. Keep out of reach of children.
Fuse Replacement
Maintenance Instructions
Moving and Storage Instructions
Troubleshooting
Accessory/Replacement Parts
Customer Service
Warranty
6
6
7
7
7
8
8
MACTOOLS.CO.UK