SNOWJOE SUNJOE SWD6600 Mode D'emploi page 12

Troubleshooting
m
WARNING!
Always unplug the power cord before performing any adjustments, maintenance or repairs to your
electric wet/dry vacuum.
Problem
Device does not start
Dust comes out from
motor cover
All manuals and user guides at all-guides.com
Possible Cause
Mains voltage is not present
The equipment is not switched ON
The collection tank is full
Defective appliance cord or ON/OFF switch
Defective motor
The nylon mesh filter is missing or damaged
There is a blockage in the nozzle, hose, or air inlet.
The nylon mesh filter is clogged by fine dust
Possible Solution
Check power supply – cord, breakers, fuses.
If damage is found, contact a qualified
electrician to repair
Switch on the equipment
Empty the collection tank
Contact Snow Joe
1-866-SNOWJOE (1-866-766-9563) to repair
Attach or replace the nylon mesh filter
Check the unit for blockage. Clean or
replace the nylon mesh filter
12
customer service at
®