Publicité
Les langues disponibles
Les langues disponibles
INTRODUCTION
Thank you for deciding to purchase the Large Scoop Bowl from Aidapt. The Large
Scoop Bowl is manufactured from the finest materials available. When used
correctly it is designed to give many years of reliable, trouble-free service.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
INTENDED USE
This useful Scoop Bowl has a secure, non-slip suction base to grip a hard, flat
surface such as a table, trolley or lap tray and is specially shaped with an extended
lip section on one side to make it possible to scoop food into a spoon or onto a fork
using one hand, assisting independent dining.
INSTRUCTIONS FOR USE
Ensure that the surface on which you will be positioning the Scoop Bowl is
•
clean and dry.
Position the Large Scoop Bowl as desired then press down to secure it to
•
the surface with the built-in non-slip suction base.
Fill the Large Scoop Bowl and use the specially shaped raised lip to scoop
•
food onto a fork or spoon by pushing the utensil against and up the side of
the raised lip.
To remove the bowl break the suction by raising one edge slightly and
•
lifting the suction base, then twist the base to fully release the suction and
lift it free from the surface.
NB. If the bowl is not empty, care must be taken when removing the bowl from
the surface to avoid spillage.
Usage and Maintenance Instructions
All manuals and user guides at all-guides.com
2
Ver. 2 07/2012 (2159)
Publicité
