Publicité
Les langues disponibles
Les langues disponibles
15
16
17
4 / 12
EN: Installation Sheet
Package
The package contains:
•
1X wireless detector
•
1X drilling template for fixing holes
•
2X CR123 3 V lithium batteries
•
2X 31.75 mm / 1.25 in. wall plugs
•
2X 31.75 mm / 1.25 in. screws
•
1X lens mask
•
2X additional curtain shutters
•
1X tamper cup
•
2X tamper caps (different lengths)
•
1X plastic locking tool
•
1X installation sheet
•
1X front cover screw cap
Introduction
The wireless outdoor PIR 319.5 MHz detector is an outdoor
motion detector and alarm trigger that uses two independent
passive infrared detectors.
Both sensors must trigger to cause the detector to signal an
alarm. TX-2810-01-4 uses quad PIR technology to deliver
precise, reliable presence detection.
Programmable options include a variable pulse count and a
choice of three detection ranges: 10 m / 33 ft., 20 m / 66 ft.,
and 30 m / 98 ft.
The integral dual-axis tilt sensor allows 180° of pan and 90° of
tilt. This increases the speed of the outdoor installation and
provides incredibly accurate aiming of the detection pattern.
The electronics module is acrylic coated for additional
component stability. It is encased in a vandal-resistant, high-
impact, UV stabilized plastic housing with an opaque
polyethylene front cover ensuring that the sensor is impervious
to and unaffected by weather conditions.
P/N 1079515 (ML) • REV B • ISS 23JAN13
Publicité
