Promax TV EXPLORER HD Mode D'emploi page 33

All manuals and user guides at all-guides.com
[38] CAM module extraction button
Press it to remove a
[39] HDMI Connector
[40] USB Connector
It enables the communication with a PC, and to download dataloggers and
channel plans.
[41] CAM module connection socket
Enables the conditional access (desencryption) of encoded digital TV signals in
DVB-CI
agreement with
[42] TS-ASI Output .
[43] TS-ASI Input .
5.2 Adjustment of Volume and Monitor Parameters
Repeatedly pressing the
CONTRAST BRIGHTNESS
,
NTSC colour system). On activation of a menu for a specific parameter the screen
displays a horizontal bar whose length is proportional to the parameter level, to modify
this value simply turn the rotary selector
value press the rotary selector
5.3 Selecting the Operation Mode: TV / Spectrum Analyser /
Measurements
TV EXPLORER
The
Analyser Measurements
and
Analyser press [13] key. To switch to the Measurements mode press
TV operation
In the
this is the default operation mode, various functions can be selected, as shown in the
following paragraphs.
Spectrum Analyser
In the
the active band (terrestrial or satellite). The span and the reference level.
Not available for the Limited Edition(LE) Version.
Page 30
USER'S MANUAL.
CAM
module inserted into the connection socket [38].
H -D M
( igh efinition ulti-media
(Common Interface) recommendation.
[20] key sequentially activates the
SATURATION
, and
[1]. To exit the menu and validate the new
[1].
HD / HD
has three basic operation modes:
LE
. To switch from TV operation mode to the Spectrum
mode the demodulated television signal is shown on-screen;
operation mode the screen displays the spectrum of
TV EXPLORER HD / HD
I
nterface).
HUE
control menus (this last only for
LE
VOLUME
,
TV Spectrum
,
[12] key.
10/2012