FLAMEBOX CUBEBOX 7 NEO Manuel D'instructions page 43

3.7. SPARE PARTS
If you need to replace any part of your Flamebox,
we recommend that you only use original parts
(diagram on page 46).
1 – Upper flame deflector (stainless steel)
2 – Intermediate flame deflector (stainless steel)
3 – Stainless steel support profile for deflector
4 – Refractory deflector (2 or 3 parts*)
5 – Refractory side panels (2 parts)
6 – Refractory back panel (2 or 3 parts*)
7 – Fixing profile for back panel (stainless steel)
8 – Log retainer
9 – Door lock kit
10 a) & b) – Door hinge (available left and right)
11 – Door
12 – Ceramic glass
13 – Door handle (available right and left)
14 – Ash drawer
15 – Ash grate
16 – Left side - blower / fan kit
17 – Right side - blower / fan kit
18 – Thermostat
19 – 3-way ceramic connector
20 – Resistors
21 – Rocker switch
22 – Front grill
* The number of parts depends on the model
The use of non-original parts, as well as
modifications to the intended use of your
Flamebox, voids the warranty.
4. OPTIONAL EXTRAS
Flamebox has a set of options that you can
purchase from your Flamebox installer.
Touch controller - Allows ventilation regulation in
5 speeds. This option must be pre-installed at the
factory.
RACK Module – Firewood rack to attach
underneath the stove. It is supplied with adjustable
feet and stainless-steel inner plate. It is available for
Cubebox 7, 8 and 10 models. Height 38cm.
Vertical RACK Module – Firewood rack to attach
laterally to the stove. It is supplied with adjustable
feet and stainless-steel inner plate. It is compatible
with Cubebox 7, 8 and 10 models with RACK.
BENCH Module – Support base for the stove. It is
available in sizes: 100cm, 120cm and 140cm.
Height 30cm.
EN P a g e | 43