Keypad Lock; Led Indicators - Texecom Premier Elite Série Guide De L'utilisateur

Premier Elite Series User Guide
EN. Overview
Introduction
Users of the alarm system will be assigned a unique 4, 5 or 6 digit User code, and may be assigned a Proximity Tag or a SmartKey™.
Codes, Tags & SmartKey™ are used to arm and disarm the system. Some User codes can also access additional options such as,
system tests and omitting zones. Keypads will be installed throughout the premises, usually one at each entry/exit door. The ke ypads
are used to perform all of the system operations i.e. Arming, Disarming etc. Most User codes can be used at any keypad on the system.
However, Local Users will only be able to use certain keypads on the system.
Keys
ICONS UK English
 
=
 
=
 = 
 = 
 = 
 = 
 = 
 = 
 = 
The Keypad Emergency Keys
In case of emergency, the alarm system can provide three immediate emergency alarms by pressing and holding two specific keys for
two seconds.
Emergency Alarm
Fire
Panic Alarm (PA)
Medical
The Keypad Quick Arm Keys
The 'Quick Arm' keys allow the system to be armed without having to enter a User code first.

The 'Quick Arm' keys will only work if the keypad has been programmed to allow arming in this way.
To FULL arm the system, press

Keypad Lock

The keys on the keypad can be locked to prevent unwanted access to the system.

The Emergency keys will NOT operate with the keys locked.

To Lock the keys press

LED Indicators

Five LED indicators have been provided to indicate the status of the system.
LED Status
Power On
Flashing
Service On
Off
Ready On
Off
Flashing
Info. On
Off
Omit On
Off
2
English
  
=
  
=
=   
=   
=   
  
=
  
=
  
=
 
= 
Press Keys

&
 
&
 
&
 

.To PART arm the system, press

and together.
AC mains is present on the control panel
AC Mains is not present, the control panel is running on the standby battery
The system requires attention, contact your installer
The system does NOT require attention
All zones are secure and the system is ready to be armed
One or more zones are active
The system has zones (with the 'Force Omit' attribute) that are active
The system is armed (can also be programmed for other indications)
The system is unarmed (can also be programmed for other indications)
One or more zones are omitted
No zones are omitted
LED
=
=
=
 
SmartKey™

Buttons

=


=


=


=

The emergency keys can be enabled/disabled for each keypad on the system. The Panic
alarm can be programmed for either audible or silent operation. The Panic alarm can be
programmed for either instant or delayed operation
 
,
To Unlock the keys, press
Meaning
Power
Armed/Info OK
Omit
  
  
LED's
Function

Power 

Arm 

Part Arm 

Disarm 
 
or followed by
 
and together again.
= Ready
= Ready
= Service
 
 

Status

Disarm

Part Arm

Arm
.
INS662