Technical Specifications - afx light BTBOX Manuel D'utilisation

19
20
21
22
BTBOX Controller
1）Pair the BTBOX with the mobile which installed AFX AIR App.
2）Open mobile AFX AIR App, select the color and function to operate.
The mobile will transmit the signal to the Bluetooth receiving module BTBOX of the XLR controller. When the Bluetooth
receiving module receive the data, will transmit it to the receiving machine. Then the mobile will control the lighting.
The charge and discharge function of the BTBOX controller
BTBOX controller with the built-in lithium battery, supplies the power to the control board,
no external power adapter when the battery runs out, use adapter to charge recycling.
The charging time of Lithium battery：4-5 hours
The discharge time of Lithium battery：About 5 hours
6. AFX AIR Control Mode (Control by mobile APP & Bluetooth Transceiver)
This product can be controlled by the free application AFX AIR, available on iTunes
with mobile Phone or tablet computer. So mobile phone or tablet directly controls the light.
Operation method is as follows:

TECHNICAL SPECIFICATIONS

Power supply .............................................................................................................. DC5V – 500mA
Battery ......................................................................................................... Lithium DC 3.7V 800mAh
Battery run time ....................................................................................................................... 5 hours
Beam charging time ................................................................................................................. 5 hours
Electric products must not be put into household waste. Please bring them to a recycling centre.
Ask your local authorities or your dealer about the way to proceed.
© Copyright LOTRONIC 2016
®
FREEPARQUAD
IPAR318
(10 channel)
Dmx channel mode
(Suitable for any dmx unit)
Delete code
Install new software
®,
& Google Play
Page 7