Télécharger Imprimer la page

prilux Catt Basic Manuel D'instructions page 2

Publicité

PRECAUCIONES:
• Desconecte la corriente antes de instalar el producto.
• Mantenga el producto fuera del alcance de los niños.
• No sumerja este producto en agua ni lo manipule con las ma-
nos mojadas.
• No usar guantes ni cualquier material plástico.
• No golpee el producto.
• No instale el producto donde haya fuentes de calor o concen-
traciones de humedad.
• No manipule el producto mientras se encuentre en funciona-
miento y déjelo enfriar antes de tocarlo con las manos.
• Mantenga una distancia mínima de 1m con la superficie u
objeto a iluminar.
• No válido para utilización en baños.
• La pantalla no debe ser cubierta por material aislante térmico
en ningún caso.
• Si el producto se encuentra dañado sustitúyalo inmediatamen-
te por uno nuevo.
• Manipular la luminaria sujetando el cuerpo, nunca presionando
el difusor ya que podría hundirse y dañar la fuente de luz (LED).
• Esta luminaria contiene componentes sensibles a la electrici-
dad estática y una descarga sobre ella podría destruir o dañar
sus componentes.
• Producto de uso exterior
• Lámpara no reemplazable.
AVISO
• Antes de comenzar la instalación de éste producto, por favor,
lea atentamente las instrucciones y guárdelas en un sitio
seguro.
• La instalación debe realizarla personal cualificado.
• La inadecuada manipulación de los componentes o de la
propia luminaria podría dañar el correcto funcionamiento de
este producto, quedando anulada la garantía del fabricante.
• Queda anulada la garantía del fabricante: si la instalación no
se realiza según lo indicado en el REBT 2002.
• Es de obligado cumplimiento la aplicación de ITC BT09-4 del
rebt (instalación de protectores de sobretensiones en líneas
y luminarias) para instalaciones industriales y de alumbrado
público. La garantía no cubre daños producidos por sobreten-
siones en luminarias sin protectores de sobretensiones.
ATENCIÓN!!! RESPETAR LAS PRECAUCIONES DE MANIPULACIÓN DE LOS
COMPONENTES SENSIBLES A DESCARGAS ELECTROSTÁTICAS (LED).
2/4
22 marzo 2024 / m-catt-basic
PRECAUTIONS:
• Disconnect current before installing device.
• Keep product out of the reach of children.
• Do not immerse this device in water or handle it with wet
hands.
• Do not use gloves or any plastic material.
• Be careful not to bang the device.
• Do not install the product in the presence of heat sources or
high concentration of moisture.
• Do not handle the product whilst it is in use and allow it to cool
down before hand contact.
• Maintain a minimum distance of 1m between the device and
the nearer surface or object.
• Not suitable for use in bathrooms.
• Under no circumstances should the screen be covered with
thermal insulation material.
• If the device is faulty, replace immediately with a new one.
• Handle the light fixture by holding the body, never the diffuser,
as it may collapse and damage the light source (LED).
• A discharge on this light fixture may destroy or damage its
electrostatic sensitive components.
• Product for outdoor use
• Non-replaceable lamp.
WARNING
• Before installing this product, please read the instructions
carefully and store them in a safe place.
• The installation should be carried out by trained staff.
• Incorrect handling of the parts or the light fixture itself may
impair the proper performance of this product. In this case,
the manufacturer guarantee shall be deemed void.
• The manufacturer guarantee shall be deemed void: if the ins-
tallation is not performed in accordance with the spanish low
voltage electrotechnical regulation 2002 (REBT 2002).
• The application of ITC BT09-4of rebt (installation of line and
light fixture surge protectors) is essential for industrial and
public lighting installations. The guarantee does not cover
against damages caused by surges in light fixtures without
surge protectors installed.
ATTENTION!!! OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC
SENSITIVE DEVICES.

Publicité

loading

Ce manuel est également adapté pour:

651110651134