LOGICOM Home Cammy Mode D'emploi page 46

• When the product is powered, please always
stay keep a distance of 20cm minimum from
the device (radiofrequencies exposure).
• Do not step on the adaptator's cable and put it
somewhere it can be easily reachable.
INSTALLATION AND
Turning the product On and Off
To turn ON Cammy, you need to plug it to the
supplied adaptator.
Cammy will keep the previous setting when
powered on, otherwise it will blink in red
(configuration mode).
Resetting the product
To reset the product to the factory settings, you
need to press the RESET button (in the back of
the camera) for several seconds until the LED
turns red and starts blinking. The blinking red
46
CONFIGURATION