RF Solutions 006 Mode D'emploi
Liens rapides
Features:
Transmit and Receive modes,
•
4 selectable frequencies,
•
315MHz, 433MHz,
•
868MHz, 915MHz
•
Long battery life
•
Small size
•
Simple to use
•
Applications
Detect Radio Interference
•
Range testing
•
Pre-Installation Performance
•
Check Receiver and
•
Transmitter Signals
Description
RF Signal Strength Meter is a versatile handheld test meter for checking radio signal
strength or interference in a given area.
The Signal Strength Meter can both transmit and receive signals making it possible to
test an installation location for suitability before installing equipment. The Signal
Strength Meter is very hard wearing, long lasting and simple to use. It has 4 selectable
frequencies, changeable at the touch of a button. It also has an auto shut off feature for
battery saving.
Ordering Information
Part Number
006
RF Signal Strength Meter
Description
Signal Strength Meter
DS-006-3
006
Manuels Connexes pour RF Solutions 006
Sommaire des Matières pour RF Solutions 006
- Page 1 Strength Meter is very hard wearing, long lasting and simple to use. It has 4 selectable frequencies, changeable at the touch of a button. It also has an auto shut off feature for battery saving. Ordering Information Part Number Description Signal Strength Meter DS-006-3...
- Page 2 Functions: The 006 has two functions Transmit - The 006 sends out a pulsed transmission which can be received by any module on the frequency selected. Or by another 006 set to the same frequency. Transmit power: the 006 transmits at 0dBm Transmit timing: the 006 sends a 100ms pulse every 1 second Transmit signal modulation: a 1KHz sine wave is modulated over the transmit signal.
- Page 3 Technical Specification Dimensions: 90 x 54 x 27mm Antenna: 17.5cm (433.93MHz) Battery: CR 2450 Typical Units Supply voltage Frequency 315.00 433.92 869.50 915.00 Bandwidth 000.10 Max. RF Input RF Sensitivity Sticker Overlay Operating Temperature Storage Temperature...
- Page 4 RF Solutions Ltd shall not be liable for any loss or damage caused as a result of user’s own determination of how to deploy or use RF Solutions Ltd’s products.