Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION PROCEDURE
Niche can be installed with a variety of products - JETCOAT
COORDINATE WITH JETCOAT
CORE SHOWER WALL: N3122-SS / N3122-MB
FLEX
SHOWER WALL: N1432S-SS / N1432-MB, N1420S-SS / N1420S-MB
™
REFLECTIONS
SHOWER WALL: N3122S-SS / N3122S-MB, N1422S-SS / N1422S-MB
™
CRAFT+MAIN
Shower Niches have been designed for easy installation with JETCOAT
®
Wall Systems - CORE / FLEX™/ REFLECTIONS™ - requiring only minimal vertical or horizontal cuts
of the shower wall panels. The Niche gives the ability to customize the look of JETCOAT
as well as, for tile installations.
SAFETY INSTRUCTIONS
Please read and understand this entire manual before attempting to assemble, operate or install the
product. We recommend installation performed by a professional.
PREPARATION
Remove niche from packaging and inspect condition.
Tools Required for Assembly (not included): Utility knife, jig saw, measuring tape and
safety glasses.
Supplies Required for Assembly (Not Included): Silicone.
1. Check for stud locations and determine desired placement for niche installation.
2. If needed, turn off any electrical or water supply.
3. All plumbing and electrical work inside the walls must be finished prior to installation.
4. When making cut out, make sure to cut lines that are level and square.
5. The mounting surface should be cleaned prior to installation of the niche.
CAULKING TIPS:
• Follow the instructions on the tube of your chosen caulk.
• Once you have completed the project, inspect all areas that have been caulked, filling in any gaps
as needed.
• Remove any excess caulk using denatured alcohol and a clean cloth. Use caution.
SHOWER WALL SYSTEM
®
2
Shower Wall System or Tile.
®
Shower
®
Shower Walls,
®
Publicité
