Étiquette De Sécurité; Spécificités - Geotech Hrt Serie Instructions

Étiquette de sécurité
Spécificités
Utilisations
Si vous préparez une pelouse pour un parcours de golf, ou bien si vous préparez une petite récolte, la fraise rotative
est parfaite pour préparer la couche supérieure du terrain pour le semis (créant une parfaite surface nivelée pour la
culture et la préparation de la pelouse). Améliore la productivité comme indiqué.
Les caractéristiques principales des HTR sont indiquées dans le tableau ci-dessous.
MODÈLE
Poids Structure
Largeur de labourage
Profondeur du labour
Nombre de lames
Vitesse tours PTO
TRACTEUR CV
MODÈLE
Poids Structure
Largeur de labourage
Profondeur du labour
Nombre de lames
To Avoid Injury or Machine Damage:
1. Read and understand Operator's Manual
BEFORE operating.
2. Lower implement to the ground, place all
controls in neutral, stop engine, set park brake,
remove ignition key, and wait for all moving
parts to stop BEFORE servicing, repairing,
adjusting, or unplugging.
3. Stand clear when implement is in operation.
4. DO NOT allow riders or operate implement in
vicinity of other persons, animals, or buildings.
5. Keep all safety guards and devices in place.
Keep hands, feet, hair, and clothing away from
moving pars.
6. Escaping hydrualic fluid can cause serious
injury, keep all hydrualic lines, fittings, and
couplers tight and free of leaks before using.
7. Ballast tractor per tractor operator's manual.
8. DO NOT allow children or unqualified
persons to operate equipment.
9. Implements with smooth input shaft
gearboxes must have snap ring in place to
ensure proper PTO shaft connection.
10. Review safety instructions annually.
11. Transporting requires secured safety locks,
safety chain, proper lighting, and lower speeds.
General safety instructions
ROTATING TINES HAZARD
1. DO NOT go under frame when tines are
turning or engine is running.
2. Disconnect and lockout power source
before adjusting or servicing.
3. Keep hands, feet, hair, and clothing
away from moving parts.
4. Keep others away.
Rotating tines hazard
HTR 90
250kg
895mm
150mm
24
540 tours/min.
16-20 CV
HTR 135
300kg
1345mm
150mm
36
To Avoid Injury or Machine
Damage:
Operate only with 540 rpm PTO
Operate only 540rpm PTO
THROWN OBJECT HAZARD
1. Keep deflector in place while operating.
2. DO NOT point outlet toward people,
animals, or buildings.
3. Stay away from outlet during operating.
4. Keep others away.
Flying debris hazard
HTR 105
265kg
1045mm
150mm
30
540 tours/min.
20-28CV
HTR 150
320kg
1495mm
150mm
42
HTR 125
285kg
1245mm
150mm
36
540 tours/min.
25-30 CV
HTR 180
350kg
1795mm
150mm
48
4