Using The Remote Handset - Cambridge Audio azur 340T Mode D'emploi

USING THE REMOTE HANDSET

The 340T is supplied with a system remote control that operates both
this tuner and Cambridge Azur amplifiers.
Power
Switches the 340T between On and Standby mode. The
blue LED on the front panel of the 340T indicates that
it is On when bright and in Standby mode when dim.
1 – 10 keys
These allow access to any stored presets you might
have saved in the 340T.
Store FM/AM
10 + key
Allows access to preset stations 11-20.
Vol
Mode Store
Vol
To store a preset with the remote press Store then
<< >>
use the
|
i
location. Press store again to confirm.
FM/AM
This button switches between the FM and AM bands
Aux Tuner
CD that the 340T is capable of receiving.
Phono DAB
AV Tape
DVD
MD Mon
<< >>
| |
For use with Tuning, Alarm and Clock settings.
Mode
Toggles between Scan and Preset modes, thereby
changing the functionality of the |<< >>| buttons.
10 Azur FM/AM tuner
buttons to select the desired preset
|
Clock
This button is used to access the Alarm menu as discussed in the
Operation Instructions section of this manual.
(Info)
i
Switches between the Display modes described in the Front Panel
Controls section. The RDS information on the FM band is dependant on
the strength of the signal.
Bright
Alters the brightness of the display backlight. There are three levels of
brightness: Bright, Normal, and Off.
Please note that the following buttons will only operate a matching
Cambridge Audio azur amplifier:
Volume +/-
Volume buttons to increase or decrease the Volume of the amplifier
output.
Source Select
The five Source Select buttons and the Tape Monitor Select button are
used to change the input source (CD, DVD etc).
Mute
This button mutes the audio on the amplifer. The Mute mode is indicated
by the channel LED flashing.