Opening With Override Key - Plastic Control Unit - Kaba Mauer 82132 Code-Combi B Mode D'emploi

The battery change contact is activated when the battery compartment lid is opened. Every
time the lock is opened a constant acoustic signal will be heard accompanied by alternate
red/green fl ashing LED. It is imperative to have these signals cancelled. The cancellation
can only be done by the primary code holder (in parallel mode) or by the dual code holder (in
ordinary dual code mode).
Cancellation of signals
1) Press ON
2) Press P
Enter valid primary code (parallel mode) or dual code (ordinary dual
3)
code mode)
4) Press P
5) Press 9
4.6 Opening with override key – plastic control unit
If, for example no code is available, the lock can be opened with the override key. To expose
the keyhole the cover plate on the input unit has to be removed with a suitable tool.
The removal of the input unit will be recognised by the lock as attempted sabotage. This dis-
mantling will be signalled on every subsequent operation after entering the code. The signal
has to be cancelled (see 4.5.2).
tool
Diagram 4: Dismantling the cover plate, horizontal mounting
Kaba Mauer GmbH
cover plate
lift here
82132 Code-Combi B
GB
Page 35