Thomasville Rivington OD-RVTN60CR-TV Instructions De Montage page 6

A
NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back
and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Securely screw twenty-one Cam Bolts (2) into the designated small holes on the Top Panel (A) and Side
Panels (C and D). Tighten the cam bolts with a Phillips screwdriver. DO NOT over tighten the cam bolts.
NOTE: Screw-in cam bolts must be screwed down flush.
3. Securely screw three Cam Bolts (2) into the designated small holes on the Partition Panel (E). Tighten the
cam bolts with a Phillips screwdriver. DO NOT over tighten the cam bolts.
Assembly Instructions
C
2
180°
E
6
2
D
E