VivAmore 12370 Manuel D'utilisation page 3

Assembly
Fig. 1 Push the rubber foot (E) onto the leg tube (D). See Fig. 1. Repeat for the other leg tubes.
Fig. 2 Fit the leg tubes with the rubber feet onto the seat tub
Fig. 3 Fit a washer (F) to each screw (G) and (H) and fasten the seat tubes (B) and (C) to the base of the seat
(A). Tighten the screws. See Fig. 3
Fig. 4 Press the pushbuttons into the leg tubes (D) and slide the legs to the desired height. When released, the
pushbuttons must project through the holes. Set all the leg tubes in the same height to avoid the risk of chair
tipping. Make sure that the chair is stable by turn the rubber
Dimensions (LxWxH): ca. 51x45x56 cm
Seat surface:
Adjustable height:
Chair weight:
Max. load:
B
D
C
D
E
E
Fig. 1 Fig. 2
Fig. 3
25742 manual.indd 2
ca. 51x31,5 cm
ca. 39-56cm
ca. 1,8 kg
150 kg
D
E
Fig. 4
o
1
4
G
19-05-11 15:19