Metabo PA 14.4-18 LED-USB Notice D'utilisation page 9

When battery is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery. Avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not operate the device in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. The lamp can generate sparks which may ignite
dust or vapours.
Avoid accidental operation. Make sure that the device
is switched off before connecting the battery and
before picking up it or wearing it. Accidentally pressing
the switch on the device or connecting the device to the
power supply when already switched on can lead to acci-
dents.
Always switch off the device when not in use.
Never use electrical devices with a defective switch.
Electrical devices that can no longer be switched on or off
are dangerous and must be repaired immediately.
Remove the battery before adjusting, cleaning and
storing the device or changing accessories. These
precautions prevent unintentional operation.
When not in use, keep the device out of the reach of
children. Do not allow persons unfamiliar with the
device or these instructions to operate the device.
Electrical devices are dangerous when used by inexperi-
enced personnel.
Maintain the device carefully. Check that the moving
parts are functioning properly and do not jam, that
there is no breakage of parts or any other condition
that may affect the device's operation. If damaged,
have the device repaired before using. Many accidents
are caused by poorly maintained electrical tools.
Do not operate the lamp without a window, or with a
window that is damaged.
Use the device, accessories, etc. as described in
these instructions. Take into account the working
conditions and the work to be performed. Using elec-
trical devices for applications other than those intended
can lead to dangerous situations.
Have your device serviced by a qualified repair
person using only genuine replacement parts. This will
ensure that the device functions safely.
Keep your device away from heat sources and fires.
Do not store and operate it under in a humid or wet
environment. Do not store in locations where temper-
atures may reach or exceed 40 °C. Examples include
alcoves, motor vehicles or metal structures during the
summer.
Do not expose the device to rain or damp conditions.
Do not leave the device on while unattended.
Only intended for use in rooms, in the heated jacket or
in a dry environment.
Never use an incomplete device or one that has been
tampered with. Do not switch on the device if parts or
guard devices are missing or defective.
Make sure that the Power Adapter and battery snap
9