Sleep Operation - FanWorld FW9 Série Manuel D'installation Et L'utilisauter

Sleep Operation

The SLEEP function is used to decrease energy use while you sleep (and don t need the same
temperature settings to stay comfortable). This function can only be activated via remote control.
Press the SLEEP button when you are ready to go to sleep. When in COOL mode, the unit will
increase the temperature by 1°C after 1 hour, and will increase an additional
When in HEAT mode, the unit will decrease the temperature by
an additional 1°C after another hour.
It will hold the new temperature for 5 hours, then the unit will turn off automatically.
Note: The SLEEP function is not available in FAN or DRY mode.
Set
temperature
SLEEP Operation
+/- 1 C
+/- 1 C
1hr
1hr
Saving energy during sleep
Fig. 1.4
110
1°C after another hour.
1°C
after 1 hour, and will decrease
5 hours
timer off