Physical Descriptions; Mounting; Power Supply; Ventilation - Abus TVAC50020 Manuel Utilisateur

5. Physical descriptions

Power
supply
Alarm Audio-IN
inputs
Alarm-Inputs

Power Supply

Audio input
HDMI Input
VGA input
Video INs 1-4
Video OUTs 1-4

6. Mounting

6.1 Power supply
Before you start with the installation please make sure that the main voltage and the nominal voltage of
the monitor comply together.

6.2 Ventilation

Please provide sufficient ventilation. The cooling openings may not be covered for sufficient ventilation.

6.3 Wall Mount

For mounting the monitor at a wall please use a VESA compatible wall mount. At the backside of the
monitor there are squarely arranged assembly holes (Middle distance 75 mm). These are compatible with
the ABUS TVAC10500 wall mount.
Please also pay attention to the installation manual of the wall mount.
During the mounting of the TFT monitor it must be separated from the mains voltage.
HDMI
Input
VGA
Input
Alarm Inputs for Pop up function.
DC 12V, 5 A
Audio signal input
Interface for multimedia-based data
PC signal input
Composite video signal input (BNC)
Loop trough video outputs
27
Video
Video
IN 2
IN 1
Video Video
OUT 1 OUT 2
English
Video
Video
IN 4
IN 3
Video
Video
OUT 3
OUT 4