Publicité
2.
The operating mode of each RX+S unit can be changed by
pressing the corresponding 'S' button. Pressing the button will
cycle through the operating modes in the order 'Standby'
(Orange) – 'Floodlight'(Green) – 'Security' (Pulsing Green) –
'Standby' (Orange) – etc.
3.
If no buttons are pressed for 5 seconds, all LEDs will extinguish.
Press any one of the 'S' buttons to repeat the process.
Temporary RX+S Muting function ("Security" mode, when used with
RX+ receiver)
Any of the RX+S units which have detected movement whilst in "securi-
ty" mode, can be temporarily "muted" so that they stop sending alarm
signals to your RX+ receiver, by simply pressing any of the "S" buttons
on the RX+R. The RX+S units will 're-arm' after 10 seconds.
Low Battery Warning
When the RX+R batteries are low the radio performance of the unit will
be reduced. To indicate low batteries the Fox Head LED indicator will
flash for 20 seconds after the last button press.
Drying Out After Use in Heavy Rain
The RX+R has been designed to be weatherproof and is rated to IPX7.
However, after use in heavy rain, it is important to allow the unit to dry
out properly by bringing the unit indoors.
NEVER place batteries in a hot environment (e.g. on a radiator).
Warranty & Product Information
For customer service returns:
Fox International Group Limited
Customer services
Dennenlaan 3A
2340 Beerse
België
eurocustomerservices@foxint.com
ENGLISH
7
Publicité
