English
Safety instructions
• This device is for indoor use only, do not store or use it in high temperature or
high moisture environments.
• It is common for the unit to get warm during usage.
• Avoid dropping or bumping the product, as damage may occur.
• Do not attempt to disassemble or open the unit.
Installation
1.
Slide one of the included adapters onto the power supply until it clicks into
place.
2.
Connect the charger to the wall socket.
3.
Connect the USB Type-C™ cable to your device and plug it into the charger.
4.
Please remove the USB cables after charging.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 07/2024
-3-